Home › Capabilities › Materials
CAPABILITIES · MATERIALS

Spring Wire Materials Guide
Oshkosh Coil Spring makes custom springs and wire forms from a full range of spring wire materials, in wire diameters from .008″ to .625″. Our engineers match material to load, cycle life, temperature, corrosion exposure and cost for industrial and OEM applications.
MATERIAL SELECTION
How We Help Select Spring Material
Our engineers review your print or application requirements and match material to:
Load and deflection needs
Cycle life and shock loading
Operating temperature
Corrosion or environmental exposure
Manufacturability and cost
This page is a quick reference. For full properties, download the free Spring Materials Properties Guide.
AT A GLANCE
Spring Wire Material Comparison
Typical maximum operating temperatures. Final limits depend on stress level and application.
Material
ASTM spec
Typical max temp
Best for
17-7 PH stainless
A313 (Type 631)
650°F (343°C)
Strength plus corrosion resistance
316 stainless
A313
550°F (288°C)
Aggressive environments
302 / 304 stainless
A313
550°F (288°C)
General corrosion resistance
Chrome silicon
A401 / A877
475°F (245°C)
Shock loads and higher heat
Chrome vanadium
A231 / A232
425°F (218°C)
Shock loads
Carbon valve
A230
250°F (121°C)
Cyclic applications
Oil tempered
A229
250°F (121°C)
General-purpose production
High tensile hard drawn
A679
250°F (121°C)
Higher strength than hard drawn
Hard drawn
A227
250°F (121°C)
General-purpose, average stress
Music wire
A228
250°F (121°C)
Precision and cyclic springs
HIGH CARBON
High Carbon Spring Wire
The most widely used spring wires, chosen for strength, cost and availability.
Music Wire
High-quality cold-drawn wire with high, uniform tensile strength. A common choice for precision springs and wire forms, including cyclic applications.
Music Wire
High-quality cold-drawn wire with high, uniform tensile strength. A common choice for precision springs and wire forms, including cyclic applications.
Hard Drawn
Cost-effective cold-drawn wire for average-stress springs and wire forms. Suitable for many general-purpose industrial applications.
High Tensile Hard Drawn
A higher-strength cold-drawn option that improves on standard hard drawn in quality spring and wire form applications.
Oil Tempered
Cold drawn and heat treated before fabrication. A widely used general-purpose spring wire for production work.
Carbon Valve
Heat-treated wire with good surface condition and uniform tensile strength. Often selected for cyclic applications.
ALLOY
Alloy Spring Wire
For shock loading and higher temperatures than carbon spring wire can handle.
Chrome Vanadium
Used for shock loads and moderately elevated temperatures when standard carbon steels are not enough.
Music Wire
High-quality cold-drawn wire with high, uniform tensile strength. A common choice for precision springs and wire forms, including cyclic applications.
Chrome Silicon
Selected for shock loading and higher temperature service than carbon spring wire. Common in demanding dynamic applications.
Chrome Silicon / Chrome Vanadium Grades
Alloy grades specified for higher strength and improved temperature capability. Final grade depends on load, temperature and application.
STAINLESS
Stainless Spring Wire
For corrosion resistance, heat resistance and environments where carbon steel won't hold up.
302 / 304 Stainless
General-purpose corrosion- and heat-resistant stainless spring wire for environments where carbon steel is not suitable.
316 Stainless
Better corrosion resistance than 302/304 with good heat resistance. Often chosen for more aggressive environments.
17-7 PH Stainless
Precipitation-hardening stainless used when higher strength and corrosion resistance are both required.
SPECIALTY
Specialty Spring Materials
Phosphor bronze, beryllium copper, Inconel 600 and Inconel X-750 are available for conductive, corrosion-resistant and high-temperature springs. Availability depends on design requirements and material sourcing.
