PRODUCTS · WIRE FORMS

Custom Wire Form Manufacturer
Oshkosh Coil Spring manufactures custom wire forms for industrial and OEM applications, from simple clips and retainers to complex multi-bend shapes formed on CNC equipment. Our engineers review geometry, material and manufacturability before production, in wire diameters from .008″ to .625″, from prototype quantities through full runs.
Wire Form Design & Quoting
DESIGN SUPPORT
Most wire forms are application-specific. Send a print, CAD model or sample and our engineers will review bend geometry, tolerances and material before quoting.
What to Send for a Wire Form Quote
-
A print or CAD model with dimensions and tolerances
-
Or a physical sample if you don’t have a print
-
Wire material, diameter and finish
-
Order and annual quantities
Wire Form Prototyping & Production
PROTOTYPE TO PRODUCTION
Wire form prototypes are formed on the same CNC wire benders as production parts, so the parts you test are the parts you get. Once the design is approved, we scale to full production with no high minimums, and 24-hour production on three shifts is available when you need parts fast.
CAPABILITIES
Custom Wire Form Capabilities
Wire diameter: .008″ to .625″
Fine wire: Small mechanisms and precision components
Medium wire: Equipment, seating, material handling and industrial assemblies
Large wire: Heavy duty brackets, supports and equipment parts
Geometry: Simple bends through complex multi-bend CNC wire forms, in round and other wire sections
Secondary operations: Shot peening, grinding, heat treating, powder coating, wet paint, welding and light fabrication
Quantities: Prototypes, short runs and full production
WHAT WE MAKE
Types of Custom Wire Forms
We produce a wide range of custom formed wire parts. If your part doesn't fit a standard category, send the print. Most wire forms are application-specific.

Wire Clips & Retainers
Retaining clips, spring clips and retainers that hold parts in place.
Wire Brackets & Supports
Formed brackets and supports from light to heavy duty wire.
Wire Hangers & Handles
Hangers, hooks and handles shaped to your mounting points.
Wire Clamps & Latch Forms
Clamps and latches that grip, lock or release under load.
Linkage Arms & Levers
Linkage wire forms that transfer motion in controls and mechanisms.
Wire Fasteners
Pins, keepers and formed fasteners for assembly.
Welded Wire Forms
Multi-piece wire forms welded in house when the design requires it.
Complex Multi-Bend Shapes
Fully custom CNC-formed shapes with tight bend-to-bend tolerances.
Our wire forms are used in agricultural, seating, material handling, lawn and garden, HVAC and industrial equipment.
Explore industries we serve →
Wire Form Materials
MATERIALS
Music wire · Oil tempered · Hard drawn · Chrome silicon · Chrome vanadium · Stainless steel (302/304, 316, 17-7 PH and others as required)
Phosphor bronze, Inconel and other alloys are available based on application needs. Material is matched to strength, environment, corrosion resistance and cost.

ENGINEERING & QUALITY
Wire Form Engineering & Quality Control
Every wire form runs through an ISO 9001:2015 registered quality system built for industrial and OEM requirements.
• Design assistance and DFM feedback
• ISIR / PPAP support when specified
• Sampling and prototype support
• Calibrated inspection tools and gauges
• Load and dimensional verification

Load test cell