top of page

Home › Resources › Spring Calculator

RESOURCES · DESIGN TOOL

Online Spring Calculator for Compression, Extension & Torsion Springs

Use our free online spring calculator to estimate spring rate, load, torque and stress for custom compression, extension and torsion springs. Then send us your design, and our engineers will review it for manufacturability, materials and performance.

springs in crate

HOW TO USE IT

How to Use the Spring Design Calculator

The calculator works as a spring rate, load and stress calculator in one tool. Four steps:

ocs-step-1 icon

Choose the spring type

Select the Compression, Extension or Torsion tab.

ocs-step-2 icon

Pick a calculation mode

For compression springs, choose one load, two load, rate-based or dimensional, depending on what you know.

ocs-step-3 icon

Enter material and dimensions

Add the wire diameter, coil diameter, free length or legs, and choose a material and end or hook type.

ocs-step-4 icon

Calculate, then send it to us

Review the rate, load or torque and stress. Click Copy Results, then paste them into Requirements or specifications on the Request a Quote form for an engineering review.

Compare wire options in our Spring Materials Guide, or look up terms in the Coil Spring Glossary.

SPRING DIMENSIONS

Spring Dimensions Explained

The terms you'll enter in the calculator, and what they mean.

Wire diameter (d)
The thickness of the wire the spring is made from.

Outside diameter (OD)
The overall diameter of the coils. Inside diameter (ID) equals OD minus two wire diameters.

Mean diameter (D)
The average of the outside and inside diameters, used to calculate rate and stress.

Free length
The length of the spring with no load applied.

Pitch
The distance from the center of one active coil to the center of the next.

Active coils (n)
The coils that deflect under load. Closed end coils don't count.

Rate
The load needed to deflect the spring one unit of length, such as pounds per inch.

Spring index
Mean diameter divided by wire diameter. Very low or very high indexes are harder to make.

What the Calculator Doesn't Cover

ENGINEERING REVIEW

Calculator results are a starting point. These factors need an engineer's review before a design goes into production:

Fatigue life

How many cycles a spring survives depends on stress range, surface condition and processes like shot peening.

Buckling

Long, slender compression springs can buckle, especially without a shaft or bore to guide them.

Hook And leg stress

Extension hooks and torsion legs carry bending stress that can exceed the stress in the coils.

Tolerances

Wire size and material properties vary within their own tolerances, which affects rate and load.

Ready for an Engineering Review?

Upload your drawing or calculator results, or call (920) 235-7620. Routine quotes usually come back within 3 business days.

bottom of page