top of page

Home › Why OCS › Prototype Program 

WHY OCS · PROTOTYPE PROGRAM

New springs in crate ready for shipping

Prototype Springs Built the Way Production Parts Are

A prototype is only useful if it tells you the truth about the part you'll be buying later. That's why the Oshkosh Coil Spring prototype program builds prototype springs and wire forms on the same machines, tooling and processes we use for production. With rapid-turn prototypes when your schedule is tight, you get to testing sooner, and when you're ready to scale, there's nothing to re-learn.

WHY IT'S DIFFERENT

Why Our Prototype Spring Program Is Different

Many shops treat prototypes as a one-off: hand-built parts that look right but behave differently once a production run begins. That gap can cost weeks of re-testing. As a Wisconsin spring manufacturer making custom springs since 1959, we close that gap by building your first parts the way we'll build your thousandth.

Production Processes From Day One

Same coiling, forming, heat treating and finishing as your production order.

Rapid-Turn When You Need It

Standard tooling on hand, in-house toolmaking and in-house secondary operations mean fewer outside steps, and we expedite prototype orders when your schedule demands it.

No High Minimums

Order the handful of parts you need to test, then scale to short runs and production volumes with the same supplier.

Engineering Review Included

Our engineers do a design for manufacturability (DFM) review and flag anything that could affect performance, life or cost.

In-House Tooling

Most prototypes run on standard tooling we already have. When special tooling is needed, our toolmakers build it in house.

Finished, Not Just Formed

Shot peening, grinding, heat treating, powder coating, wet paint, welding and light fabrication are done in house, so your prototype arrives ready to test.

WHAT WE PROTOTYPE

What You Can Prototype

Our prototype program covers the full range of parts we make.

Collection of extension springs

Coil Springs

Compression, extension and torsion springs, including conical and variable rate designs.

samples of wire forms

Custom wire forms, including clips, brackets and retainers, plus die springs.

Custom Wire Forms

spools of wire in storage

Wire Sizes & Materials

Wire diameters from .008″ to .625″ in music wire, oil tempered, chrome silicon, stainless steel and other spring materials. Compare materials →

HOW IT WORKS

How the Prototype Program Works

From the first print to full production, in six steps.

ocs-step-1 icon

Send what you have

A print, a sample, a spec sheet or results from our online spring calculator.

ocs-step-2 icon

Engineering review

We check the design for manufacturability and suggest changes that improve performance, extend life or lower cost.

ocs-step-3 icon

Your prototype spring quote

Routine quotes usually come back within 3 business days.

ocs-step-4 icon

Build and inspect

We build your made-to-print springs on production processes, with rapid-turn scheduling for urgent prototypes. Parts are inspected, and material certifications are available on request.

ocs-step-5 icon

Test and refine

Put the parts in your assembly. If something needs to change, our engineers work through the revision with you.

ocs-step-6 icon

Scale to production

Because the process is already proven, moving to volume is simple. Blanket orders, kanban and consignment programs are available when you're ready.

PLANNING TIPS

Getting the Most From Your Prototypes

A little planning keeps prototype costs down and gets you to production faster.

Tell us how the spring works

Not just what it looks like. Load, travel, space, environment and life help us suggest the right design the first time.

Bring us in early

Changes cost the least before tooling and approvals lock a design in.

Setup costs are the same whether we make 1 spring or 1,000, and some wire sizes carry material minimums. Ordering prototypes together with a first production lot often lowers the total cost.

Ask about combining orders

Skip samples when you don't need them

If you have a proven print, we build to it and parts that meet the print are ready to ship. Samples make the most sense when you need to confirm fit or function in your assembly.

MORE REASONS

MORE RESOURCES

Capabilities

CNC coiling, wire forming, finishing and testing.

Spring Calculators

Estimate rate, load and stress before you send a print.

Spring Materials Guide

Compare wire properties and temperature limits.

Ready to Start a Prototype?

Send a print, sample or spec sheet, or call (920) 235-7620. Routine quotes usually come back within 3 business days.

bottom of page