top of page

Home › Why OCS › Cost Savings

WHY OCS · COST SAVINGS

Industrial photography of a factory worker inspecting a coiled metal component on a workstation. The worker wears safety gloves and glasses in a focused, busy manufacturing environment.

Spring Cost Savings & Value Engineering

The lowest price on a quote isn't always the lowest cost. A spring that's over-specified, finished more than it needs to be, or shipped between three vendors costs more than it should. Spring value engineering at OCS looks at the whole part, and the whole way you buy it, to reduce spring cost without giving up performance.

VALUE ENGINEERING

Value Engineering for Custom Springs

Value engineering is simple in principle: keep everything a spring needs to do its job, and stop paying for anything it doesn't. When you send us a print, our engineers don't just quote it. They do a manufacturability review to see how the spring will perform, how it will be built, and where cost can come out without giving anything up.
 

With engineering, production and finishing in one Oshkosh plant, we can look at every step that adds cost, not just the unit price.

Pallet of finished springs boxed

WHERE SAVINGS COME FROM

Five Ways We Lower Total Spring Cost

Most spring cost reduction comes from the same few places. We check each one on every print we review.

Material Selection

The most expensive alloy isn't always the right one. A readily available spring wire can lower your price and shorten your lead time at the same time. We recommend the most economical material that meets your operating environment, temperature and corrosion needs.

Practical Tolerances

Tight tolerances on every dimension add inspection time and scrap. We help you hold the dimensions that matter and relax the ones that don't.

Simpler Finishes

Pre-plated wire, passivation or a simpler coating can often replace a costly secondary finish.

In-House Operations

Shot peening, grinding, heat treating, powder coating, wet paint, welding and light fabrication happen in our plant, so you don't pay for freight, handling and delays between vendors. Our toolmakers build special tooling when a part needs it, backed by a broad inventory of standard tooling.

Smarter Ordering & Packaging

Blanket orders, kanban and consignment let you buy at production-volume pricing while we stock your parts and ship to your just-in-time releases. We recommend bulk or special packaging based on what protects the spring, not habit.

THE PRINCIPLE

"Keep everything a spring needs to do its job, and stop paying for anything it doesn't."

COST DRIVERS

What Drives Spring Cost

Understanding what goes into a spring's price makes it easier to see where savings are possible.

Material

Specialty alloys cost more and can carry longer lead times and minimums.

Wire size

Some wire sizes carry material minimums, regardless of order quantity.

Setup

Setup cost is the same for 1 spring or 1,000, so small orders carry more of it per part.

Tolerances

Tighter tolerances add inspection time and scrap.

Secondary operations

Each added step, such as grinding, peening or coating, adds handling and cost.

Quantity and releases

Annual volume and release patterns affect material buying and setups.

Packaging

Special packaging costs more than bulk.

Cost driver

How it affects price

GET THE MOST VALUE

How to Get the Most Value

The biggest savings come early, before tooling, testing and approvals lock a design in place. The best results come when customers:

ocs-step-1 icon

Bring us in at the design stage

Estimate rate, load and stress with our online spring calculator, then send us your design for review.

ocs-step-2 icon

Tell us what the spring has to do

Load, travel, space, environment and life tell us more than a print alone, and open the door to alternatives that work just as well for less.

ocs-step-3 icon

Share your volumes

Annual usage and release patterns let us plan material, setups and stocking for the best price per part.

ocs-step-4 icon

Prototype on production processes

Through our spring prototype program, prototypes are built the same way as production parts, so what you approve is what you get.

SAVINGS REVIEW

What to Send for a Spring Savings Review

The more we know about how the spring is used and bought, the more savings we can find. Send what you have, and we'll follow up on the rest.

ocs-check-circle icon

Your print or a physical sample

ocs-check-circle icon

What the spring has to do: load, travel, space, environment and life

ocs-check-circle icon

Current material and finish

ocs-check-circle icon

Annual usage and release pattern

ocs-check-circle icon

Your current price, if you're willing to share it

MORE REASONS

More Reasons to Choose OCS

Why OCS

Family-owned Wisconsin spring manufacturer since 1959.

Quality & Testing

ISO 9001:2015, load testing and material certifications.

Prototype Program

Prototype springs built on production processes.

Have a Part That Costs Too Much?

Send us your print or sample and we'll look for savings, or call (920) 235-7620.

bottom of page